Dan J Reed
Member



Offline

Member Since
7-26-2004
10282 posts

Stinkville NJ
95 Golf Sport, 1987 VW Vanagon, 98 Jetta GLS

Add this post to My NotepadSend Instant Message
 JOM Lowering caps (Before/After) « » Reply to this postEdit this post

Installing some JOM "lowering caps" - um yea. Its easy, but a total waste of time IMHO. :thumbsdown:

I had to replace my strut bearings anyhow... and fix a dust boot and bump stop.. so here goes..

BEFORE - H&R Cup Kit - Stock spring hat.

Old VS new

AFTER = WASTE OF TIME = No noise, but the fact is - these did nothing to lower my car.

My Engine

Screw you cardomain.





95' Golf Sport "Schneesturm", 87' Westy Vanagon "Schultz" - 98' Jetta GLS "Wife's Car"

- my DIY page

EDM_v-dub
Member

Offline

Member Since
3-15-2003
3757 posts

Oregon

Add this post to My NotepadSend Instant Message
  » « » Reply to this post

****ty.



Bendite

Dan J Reed
Member



Offline

Member Since
7-26-2004
10282 posts

Stinkville NJ
95 Golf Sport, 1987 VW Vanagon, 98 Jetta GLS

Add this post to My NotepadSend Instant Message
 Re: (EDM_v-dub) » « » Reply to this postEdit this post

Tell me about it.

At least all and all it was like a 30 min job, and I had to adjust my camber anyhow..



95' Golf Sport "Schneesturm", 87' Westy Vanagon "Schultz" - 98' Jetta GLS "Wife's Car"

- my DIY page

Luke9583
Member

Offline

Member Since
3-17-2005
833 posts

Northville Michigan
1997 2.0 gti 2002 A6 2.7tt

Add this post to My NotepadSend Instant Message
  » « » Reply to this post

It raised your car an 1/8th inch...... lol :|
georgekelp
Member



Offline

Member Since
8-15-2005
2252 posts

Minnetonka MN
1998 Volkswagen Golf

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (Dan J Reed) » « » Reply to this post

That's lame!

Did you replace your strut mounts too?

Did you replace them with 2.0 or VR mounts?

If you changed them with VR mounts, then the vr ones just counteracted the drop of the lowering caps.

If you got new 2.0 ones and the old ones were worn out then maybe it raised it a little.

If neither of the above that is really super lame man.

I'll keep this in mind in the future.




Dan J Reed
Member



Offline

Member Since
7-26-2004
10282 posts

Stinkville NJ
95 Golf Sport, 1987 VW Vanagon, 98 Jetta GLS

Add this post to My NotepadSend Instant Message
 Re: (Luke9583) » « » Reply to this postEdit this post

Yea, I think part of my be the new strut bearings... my old ones were really, really hammered..

Big time.

Flat.

(They were 2.0 bearings, old style... same type replaced...)

Modified by Dan J Reed at 1:39 AM 6-28-2006



95' Golf Sport "Schneesturm", 87' Westy Vanagon "Schultz" - 98' Jetta GLS "Wife's Car"

- my DIY page

thelegendofjohn
Member

Offline

Member Since
2-6-2005
404 posts

Portland, Oregon and Orange, California
1996 Jetta GLS Wolfsburg, 1989 Cabriolet (sold), 1971 Bus (sold, i miss it)

Add this post to My NotepadSend Instant Message
 Re: (Dan J Reed) » « » Reply to this post

when i put new strut mounts in my car got raised up quite a bit. my old ones were really shot and one was even ripped.. i bet thats what raised your car.



Quote, originally posted by eyelashout »
it looks like some sort of sea dragon

don't like the current administration in the usa? buy my creations, and help a poor college student out - http://aviandesigns.8k.com

Sirsmit418
Member



Offline

Member Since
4-26-2005
825 posts

Cincinnati Ohio
1997 VW Jetta VR6

Add this post to My NotepadSend Instant Message
  » « » Reply to this post

i think its actually higher..



97 jetta glx vr6


Polizei_99
Member



Offline

Member Since
3-1-2003
8293 posts

Chalreston, durrty south SC
'00 V70, 99 Jetta GL, 92 GTI

Add this post to My NotepadSend Instant Message
  » « » Reply to this post

did u drive it at all and give the spring a chance to "settle"?



thats when i reach for my revolver...

Pf3il
Member

Offline

Member Since
12-27-2004
4172 posts

Berkeley Heights, NJ
& UConn

Add this post to My NotepadSend Instant Message
 Re: (Polizei_99) » « » Reply to this post

i'm thinkin the springs will settle a tad. at least i hope so. poo.



-evan

simplicity is the ultimate sophistication // davinci
did you know that when you post off-topic threads in the mk3 forum you support terrorism? // shadyupinsmoke

Franco...
Member

Offline

Member Since
6-18-2004
7183 posts

out of the gay
and in da Valley...CT

Add this post to My NotepadSend Instant Message
 Re: (Pf3il) » « » Reply to this post

glad i never did it...i thought about it many times. people usually have mixed results with these.



autocratica

1 thirty pack at a time

civcklr
Member



Offline

Member Since
6-9-2002
1877 posts

Tucson az
78 Rabbit, 95 glx ,89 RRC

Add this post to My NotepadSend Instant Message
 Re: (Franco...) » « » Reply to this post

ATHF RULES......

I saw about a 15mm drop after installing mine...



*Bahhhhhhh*..The sound of the Vortex Sheep.


HatchBackMafia................

LG6R
Member



Offline

Member Since
10-20-2003
11534 posts

113 posts

Add this post to My NotepadSend Instant Message
  » « » Reply to this post

I thought about lowering caps before. But not anymore.

Dan



Quote, originally posted by LedJetta »
this thread makes me want to shave my ass and walk backwards.


Dan J Reed
Member



Offline

Member Since
7-26-2004
10282 posts

Stinkville NJ
95 Golf Sport, 1987 VW Vanagon, 98 Jetta GLS

Add this post to My NotepadSend Instant Message
 Re: (MerryBerry) » « » Reply to this postEdit this post

Yea, I duuno, I'm pretty bummed..

I mean, on the upside now that I got a nice 1.0(-) camber per side - car handles LIKE A DREAM! - and the strut bearings were falling out... so meh... I was there... thought I'd give it a shot.

So I feel like I had the wheels off for a good reason..

But still, 45$ - down the crapper.

As for things comming down, the springs and cup kit are well used, very well used.. and I am sure unless I get some sag 4 years from now out of the mounts, I'll never see that 15mm again.

I'm glad you could all learn from my mistakes. Moe was right.



95' Golf Sport "Schneesturm", 87' Westy Vanagon "Schultz" - 98' Jetta GLS "Wife's Car"

- my DIY page

JRon24
Member

Offline

Member Since
11-10-2003
14083 posts

norf jursey

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (Dan J Reed) » « » Reply to this post

where'd you get those nifty strut tower caps?



px3
Lock ya windows, close ya doors.

black roof FS

"I love hip hop, i just hate the ****** in it"

Dan J Reed
Member



Offline

Member Since
7-26-2004
10282 posts

Stinkville NJ
95 Golf Sport, 1987 VW Vanagon, 98 Jetta GLS

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (JRon24) » « » Reply to this postEdit this post

Old school MKII styles man!



95' Golf Sport "Schneesturm", 87' Westy Vanagon "Schultz" - 98' Jetta GLS "Wife's Car"

- my DIY page

Acri2903
Member



Offline

Member Since
10-13-2004
1128 posts

HBG PA
Nimbus MK2 2.0T

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (Dan J Reed) » « » Reply to this post

that was a 1/2 hour wasted, you could've been installing a turbonator, gosh!!



95 Mulberry GTI 3.0L VRT - sold
96 VR6 GTI: MKIV 12v VR6 S/C'd
92 Golf GL 2.0 aba turbo

bosoxfan455
Member



Offline

Member Since
9-7-2005
1832 posts

Windham Ct
99 Jetta Wolfsburg

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (Acri2903) » « » Reply to this post

wow that really sucks sorry to hear. i thought mine helped out alot too.
i dont ever remember reading about someone having this happen



Eastern CT GTG Mondays at RIBBITS


nfx
Member



Offline

Member Since
7-18-2004
1553 posts

millersville and btown pa
LG6S luxury bucket

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (bosoxfan455) » « » Reply to this post

wait so they really show no difference? that's lame...

and dan why is your car so high?



BtownDubs

We're the new definition of lazy.

Dan J Reed
Member



Offline

Member Since
7-26-2004
10282 posts

Stinkville NJ
95 Golf Sport, 1987 VW Vanagon, 98 Jetta GLS

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (nfx) » « » Reply to this postEdit this post

Quote, originally posted by nfx »
and dan why is your car so high?

Because God hates me.



95' Golf Sport "Schneesturm", 87' Westy Vanagon "Schultz" - 98' Jetta GLS "Wife's Car"

- my DIY page

GinsterDbS
Member



Offline

Member Since
6-27-2005
254 posts

scituate RI
MKIII 99 GTI vr6

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (Dan J Reed) » « » Reply to this post

I installed lowering caps from TM tuning, mine droped just as much as yours
slickrick592
Member

Offline

Member Since
5-2-2005
1763 posts

Gilbertsville PA
97 Ginster GTI (sold) 89 gti 16v

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (GinsterDbS) » « » Reply to this post

my car sits lower than all my friends 60/40........................maybe my kit is older and has more sag or the caps actually worked on my car. i need new strut mounts though too so yea its gonna be a little higher soon anyway



I do repair/upgrade work

lilbacon3
Member



Offline

Member Since
7-20-2005
636 posts

Toledo OH
1996 VW Jetta GLS...Never run with oil.

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (Dan J Reed) » « » Reply to this post

"WTF is wrong with those JOM engineers!?"




WTB: Rear disc brake conversion for mk3 jetta, pref. around N-Ohio.
Things for sale:
-Stock dummy reflectors
-Stock headlight switch+wiring+stock turns
E-mail- lilbacon3@netzero.com AIM-lilbacon3ut

eurozex
Member

Offline

Member Since
10-15-2001
6348 posts

Peoria AZ
99 GLX 01 GLS VR6

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (slickrick592) » « » Reply to this post

I have caps on my Weitec 60/40 and it clearly sits lower than another mk3 VR at my work with a weitec 60/40. I dunno I had them on my mkII and they didnt do anything. guess its hit or miss




94jetta~~
Member



Offline

Member Since
2-21-2002
2559 posts

Pueblo CO
07 mkV GTI and 94 Jetta 2.0L

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (eurozex) » « » Reply to this post

that sucks a fatty **** like whoa man. Geth them to refund you the money and cut some springs or not, i drank wayy too much



"Handle it? Sir...for 2 billion dollars, I'd handle my grandfather's balls."
-Cartman

eurican
Member

Offline

Member Since
3-10-2001
4372 posts

Fall Riva MA
98 WOB-8V2L

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (eurozex) » « » Reply to this post

Stupid question to ask you, but i'll ask anyway. Did u take it for a drive after the install? She also needs to go lower.

edit..i'm too tired and didn't read that people already asked this question.

-chris.




Modified by eurican at 12:41 AM 6-28-2006



¤Rego¤

come on ova to my place

DubbinReallyFast

brobsrabbit
Member



Offline

Member Since
6-18-2005
7764 posts

Waterloo Iowa
1997 Black GTI VR6 (wOOt)

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (94jetta~~) » « » Reply to this post

lol I don't think Dan J Reed will be cutting springs anytime soon....



I thought I found a sweet orange hair in my weed but it turned out to be part of a Dorito.

http://cgi.ebay.com/ebaymotors...%3AIT

my head is like an unblocked drain,
my head is full of brains...
my arms are like two shipyard cranes,
that may not work again...

Gibson5469
Member



Offline

Member Since
10-11-2005
5381 posts

CT
1994, VW Jetta

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (JRon24) » « » Reply to this post

Quote, originally posted by JRon24 »
where'd you get those nifty strut tower caps?

Early style 2.0 bearing equipped cars had the caps, I've put them on my vr6 bearing equipped car (thanks to the PO after a coilover install) and for some reason they pop off?

Modified by Gibson5469 at 12:45 AM 6-28-2006



pm for prices
LED swap LED swap
Danbury GTG

LG6R
Member



Offline

Member Since
10-20-2003
11534 posts

113 posts

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (Gibson5469) » « » Reply to this post

Quote, originally posted by Gibson5469 »
Early style 2.0 bearing equipped cars had the caps, I've put them on my vr6 bearing equipped car (thanks to the PO after a coilover install) and for some reason they pop off?

You're right. They only stay on the 93-95 2.0 bearings and on Mk2's. They won't stay on VR6 bearings. It fits right over them but I don't know why they don't stay on.



Quote, originally posted by LedJetta »
this thread makes me want to shave my ass and walk backwards.


performancevdub
Member

Offline

Member Since
6-8-2003
5438 posts

Easton CT

Add this post to My NotepadSend Instant Message
  » « » Reply to this post

same **** happened to me a loong time ago

iirc, these thing don't work on any aftermarket suspensions



super dumb retarded ride the yellow bus
mkIII myspace group
fs: work equips
www.remmy.info

yo vanilla
Member



Offline

Member Since
3-12-2004
5115 posts

apple town wi
98 glx 03 mazda6

Add this post to My NotepadSend Instant Message
 Re: (Dan J Reed) » « » Reply to this post

Quote, originally posted by Dan J Reed »
Yea, I duuno, I'm pretty bummed..

I mean, on the upside now that I got a nice 1.0(-) camber per side - car handles LIKE A DREAM! - and the strut bearings were falling out... so meh... I was there... thought I'd give it a shot.

So I feel like I had the wheels off for a good reason..

But still, 45$ - down the crapper.

As for things comming down, the springs and cup kit are well used, very well used.. and I am sure unless I get some sag 4 years from now out of the mounts, I'll never see that 15mm again.

I'm glad you could all learn from my mistakes. Moe was right.

well think of it this way: if the strut bearings raised your car, then think of how much higher the car would have been if you kept the stock caps



-allan
T3AM PR0 T34M float like a cadillac, sting like a beemer

Dan J Reed
Member



Offline

Member Since
7-26-2004
10282 posts

Stinkville NJ
95 Golf Sport, 1987 VW Vanagon, 98 Jetta GLS

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (MerryBerry) » « » Reply to this postEdit this post

Quote, originally posted by MerryBerry »
You're right. They only stay on the 93-95 2.0 bearings and on Mk2's. They won't stay on VR6 bearings. It fits right over them but I don't know why they don't stay on.

They dont work because of the ammount of "drop" the 2.0 vs the VR6 struts travel (meaning, at the top of the strut where its held into the fender... the top "cap" as it were).

If you put them on the VR6 or new style - the cap bottoms out on the strut tower and pops off.

IMHO VW got rid of them with the new design as a cost saving measure.



95' Golf Sport "Schneesturm", 87' Westy Vanagon "Schultz" - 98' Jetta GLS "Wife's Car"

- my DIY page

jhayesvw
Moderator



Offline

Member Since
10-2-2001
8781 posts

tucson az
1995 Golf Sport (VR6 Bright Surf Green), 04' Passat Wagon (Silverstone)

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (Dan J Reed) » « » Reply to this post

dan,
dont worry, the new strut bushings will settle 10mm or so over the next few months.

update this thread in september. i bet its lower.



MY CAR
18 speeds & 19.5lbs
vwvortex is like the Hotel California, you can check out any time you like, but you can never leave.

ThatGuy
Member



Offline

Member Since
1-28-2004
15198 posts

So Cal
95 GTi 12vT 85 GTi 8v

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (Dan J Reed) » « » Reply to this post

i hope it settles some for you



Phil | GTiKid at gmail.com

VW Fixx | SoCalEuro | Petey's Polishing

FS: BBS RF's 17x8 and 17x8.5

soccergk
Member



Online

Member Since
4-19-2005
6907 posts

Back in NJ
95 Jetta City

Add this post to My NotepadSend Instant Message
 Re: JOM Lowering caps (jhayesvw) » « » Reply to this post

ut oh i was planning on installing mine next week. hopefully yours just needs to settle. want to install mines dan?

i found these before and after pics in the archives



Modified by soccergk at 1:03 PM 6-28-2006



FS/T:NEW Borbet type Ts 4lug

FS:mk3 switchblade keys


AIM-grey55342

Myspace
My car

Reflextuning

First  1 2 >  Last
» Return to Golf III & Jetta III

Quick Reply