TECCCP

Community College of Philadelphia

TEC Podium Quick Start Guide

1) Lower electric screen with wall switch

2) Unlock lower cabinet door(s)/ keyboard & mouse area/ document camera drawer

3) Turn on Main Power

4) Power up the projection system by touching the Display Power “ON” button. This command will initiate the projector warm-up. Startup mode for the projector can take up to 30 seconds since the lamp needs to warm up.

	Graphic Indicator Panel

5) Are you using a DVD, audio CD, or VHS tape?

Ø Press the “Title” button on the touch panel to power up the DVD player and VCR

Ø Insert disc or tape into player

Ø Select the appropriate player on the Graphic Indicator panel

Ø Navigate through the disc or tape using the touch panel controls

6) Are you using the Document Camera?

Ø Pull out the document camera drawer

Ø Raise camera by first pushing on the lock button

Ø Turn on camera with power button and select either top or base lamps

7) Are you using the installed computer?

Ø Turn on both the PC and PC monitor

Ø Pull out the keyboard/mouse tray

Ø Log in using the room username (e.g.,W248w2k) and press <Enter>

PC Power

on/off

	PC monitor Power on/off

8) Are you using a laptop computer?

Ø Using the 3’ VGA/audio cable supplied (stored inside the cabinet) attach the laptop as follows:

Ø With the laptop computer turned off, attach the long audio extension and the appropriate VGA cable adapter to the monitor output of the laptop and the other end (shorter audio extension) to the input at the Podium.

Ø Turn on computer. (If a computer image does not appear the user may need to ‘toggle’ between the local and secondary monitor using the laptop “F” function keys to initialize VGA output.)

Ø Audio levels for the laptop can be adjusted from the panel by rotating the “Master Volume” knob on the Graphic Indicator Panel

Ø When finished, shut down and unplug your laptop and replace cable in podium.

9) When you are finished using the system:

Ø Press Display Power on/off. The Graphic Indicator Panel will begin to blink.

Ø Turn off the document camera, re-fold the arms, push in the drawer, and secure the lock

Ø Remove any disks or tapes from the DVD player, VCR, and computer drives

Ø Use the normal Shut Down procedure for the installed Windows® computer

Ø Store the keyboard and mouse and secure the lock

Ø When the Graphic Indicator Panel stops blinking, turn off the Main Power

Ø Lock the lower cabinet door(s) and return the keys to the AudioVisual department

Ø Raise the electric screen with the wall switch